Model M4 Electro-Mechanical Slide Gate

The M4 is a strong and dependable rack and pinion gate operator. This model was designed to operate with precision under the most demanding conditions. It is suitable for commercial and residential use and is rated for continous duty with adjustable opening and closing pressures. The M4 has an automatic bypass for operation in the event of a power outage.

Our unique rack and pinion design does not allow for the rack to disengage from the operator. The high-torque motor floats with the gate so that even an 8 inch crown in the driveway will not disengage the operator.

Our design is the most powerful model in its category. The variable pressure design can be adapted to the required pressure simply by regulating limiter valves. By regulating the power to a suitable level, the operator can move gently but firmly. The gate can even be stopped manually when in motion.

All units are equipped with a thermal probe, which, in the event of overheating, ensures that by cutting off the power supply the operation is interrupted.

The M4 has no exposed chains or linkage to detract from the gate's visual appearance.

Units are also available in black, bronze, gray, green and red. Colors are subject to an additional charge.

24VDC Motor
Automatic Close Digital Timer (2-second minimum and 2-minute maximum)
Selection of two kinds of maneuvers (A/B)
Maximum duration of maneuver limited to 2 minutes
433.92 Mhz incorporated receiver (Vario Code System)
Radio Card Connector
Tension-free relay contact for flashlight lamp (maximum current 16 amps at 120 volts)
4-amp protection fuse
Output shaft speed 45 RPM/TMP
Gate speed 1 foot per second
1,400 pound maximum gate weight
Solar Ready
48 pound maximum drag strength
440 inch/pound-foot maximum starting torque
120V Power Supply
120 watt power draw
5-amp maximum motor current
120V to 24V, 155VA Transformer
Battery backup units avaiable
14 to 104 degree Farenheit working temperature
Sealed bearings
24VDC, 150mA auxiliary output
Height 10 inches
Depth 9-1/2 inches
Front Width 13-1/2 inches

 

5-Year Warranty Information:: ::Customer Acknowledgment

Download Installation Manual PDF :: ::Download Information Sheet PDF

PDF documents require Adobe Acrobat Reader, a free program. Click here to download.

Original site design by Ball Advertising Group, Inc. • Site maintained by Fire Nebula Web Design