-  800/900 Long Series Operator  -

900l.jpg

The 800/900 Long Series comes in 3 different styles and 2 different voltages.

800/900 Long. This operator is normally used in applications where the gate column is too large in diameter for normal mounting dimensions or in applications where an insert cannot be mounted in the column. It will open a gate with a 90 degree swing in 12 seconds and close the gate in 14 seconds.  Capable of 120 degree swing.

800/900 Long Slow Speed. This slow-speed operator should be used in applications where the gate is over 16 feet, the gate travels up or down a hill, and/or the gate frame will flex when it reaches the end of travel. It will open a gate with a 90 degree swing in 17 seconds and close the gate in 20 seconds.

The 800 Long is a 220 VAC Single Phase.

The 900 Long is a 115 VAC Single Phase.

Heavy Duty Commercial Hydraulic Operator.  For gate leaf's up to 24 feet in length.  Electric locks are recommended.

 

Some states and cities require (in case of a power outage), that the gate must be able to be pushed open by the fire or emergency vehicle. Our Manual Bypass screw allows for hand operation and keeps your operator current with local laws.  Check valves can also be removed if needed, however, will require electronic locks to ensure safety and protection.

With the operator mounted inside the property, the operator can be installed to swing inward or outward. Most mechanical operators must be mounted on the side the gate will swing toward.