top of page

-  Products  -

We have operators for virtually any swing or horizontal slide application. Most of our products are UL-325 and ETL certified. All hydraulic gate operators in the Eliminator Series (pictured below) need no positive stops. The operator automatically slows the gate during the final 5 degrees of motion.

Hydraulic Operators


500 Series Operator

Hydraulic System

The 500 Series is a residential swing gate operator. As a light-duty operator, it should be subject to no more than 60 cycles per hour.


800/900 Long Series Operator

Hydraulic System

This operator is normally used in applications where the gate column is too large in diameter for normal mounting dimensions or in applications where an insert cannot be mounted in the column.


600 Series Operator

Hydraulic System

The 600 Series is a residential and medium-duty commercial operator for applications that require 100 cycles per hour or less.



Hydraulic System

*Product has been updated on the website 1100 - Discontinued thanks Byan

The Byan Systems In-Ground 1100 Hydraulic Swing Gate Operators are designed to provide you with the best in security access while being virtually invisible.


800/900 Series Operator

Hydraulic System

800/900 Standard Operator. This operator can be used for most applications. The gate leaf cannot exceed 16 feet. It will open a gate with a 90 degree swing in 12 seconds and close the gate in 14 seconds.

Enclosures and Processors


Pre-Wired Enclosures

Enclosures and Processors

We offer 3 different standard enclosures for your microprocessor. Other sizes and specifications can be created by special order.


Q2MNB Board

Enclosures and Processors

Control panel powered at 230V with integrated radio designed to control 2 motors (electromechanical or hydraulic). Programming allows different offset times in opening and closing

G2M Classic Board Design Byan Systems Inc_edited.jpg

G2M Classic Control
Board and Pre-wire

Enclosures and Processors

The G2M is a single phase, microprocessor controlled unit. It can control up to two ¾-hp, 115-volt or 220-volt AC motors.


Industrial ControlBoard and Pre-wire

Enclosures and Processors

This board is suitable for single-phasemotors and can drive up to two differentmotors at once.

Learn More >

G2M+ Industrial Control
Board and Pre-wire

Enclosures and Processors

This board is suitable for single-phase
motors and can drive up to two different
motors at once.

Slider Series

Battery Back-Up Products


M4 Electro-Mechanical Slide Operator


The Byan Systems M4 is a rack and pinion electro-mechanical slide operator. This operator is capable of movement,
allowing it to follow the terrain.


SBBI Superior Battery  Backup

Battery Backup Box

It automatically keeps your gate’s battery fully charged. This battery backup is capable of running a single-gate system (using either one or two operators) or a double-gate system (using either two or four operators).

bottom of page